British Museum blog

Building a Viking boat today

dragon stem head
Mike Selwood, Assistant Boat Manager, National Maritime Museum Cornwall
In September 2013, the National Maritime Museum Cornwall was approached by the British Museum and asked if we would produce something Viking to be filmed for their Vikings Live cinema broadcast, after seeing the Bronze Age boat replica that we had built and launched in March 2013.

Of course, we said yes. After plenty of chats with Gareth Williams, the curator of the BP exhibition Vikings: life and legend and Patricia Wheatley, Executive Producer of Vikings Live, our boat restoration team started to build the stem section of a Viking-style boat, to be constructed using traditional methods.

I was to manage the project, with my team of boat crew volunteers and boat-builder Brian Cumby, who had built the Bronze Age boat. The stem section was approximately sixteen feet long, eight feet beam (width) and about 12 feet at its highest, to be surmounted with a Viking dragon’s head. The section is equivalent to about 25% of a boat that we are planning to build next year as a feature of our Viking Voyagers exhibition in 2015.

Having assembled the team, I had to source the materials. There was no time to make nails, so they came off the shelf as galvanised Scandinavian boat nails with square roves made by our local blacksmith. The keel and stem post were to be oak, and we decided to plank in Cornish larch, not always durable for boats, but good for this project. Our friends at Tregothnan Estate, not far from us in Falmouth (also known for its excellent tea plantation) provided all of our needs, including a lot of crooks or timber turns, used for making frames to brace the planking.

Gareth, Will and Martin cutting the keel rabbet (or rebate)

Gareth, Will and Martin cutting the keel rabbet (or rebate)

Gloucester Mike cutting a plank (left). Gareth and Mike riveting a plank , and Brian doing what he does so well (supervising!)

Gloucester Mike cutting a plank (left). Gareth and Mike riveting a plank , and Brian doing what he does so well (supervising!)

Brian set up the keel and the rabbet (the groove or rebate that takes the first planks) was cut. A joint was then cut for joining the stem post to the keel to create the backbone of the boat ready for planking. Brian and his team of volunteers then built up the layers of planking by riveting overlapped planks one on to the other. This method is called clinker in Europe and Scandinavia, and lapstrake in the America and Canada. We planned on seven planks to each side, each about one inch thick and twelve inches wide. The larch planks had to be steamed in a long steam box to make the wood malleable enough to fit to the keel and stem rabbet.

Brian and Mike fitting a plank with a traditional wooden clamp, tightened by driving in a wedge.

Brian and Mike fitting a plank with a traditional wooden clamp, tightened by driving in a wedge.

To get the shape of a Viking boat we built moulds or section shapes that acted as guides. It is thought that the Vikings would have set up an overhead strong back supported by an A-frame, in order to brace the struts or shores to brace the planking. They are also likely to have heated stones to make the planks malleable as an alternative to steaming.

Gloucester Mike preparing a plank (left) and Brian setting a plank clamp (right).

Gloucester Mike preparing a plank (left) and Brian setting a plank clamp (right).

The crooks and turns were shaped and fashioned into frames, floors and knees (boatbuilding terms to describe brackets and braces that were fitted to the planking to add cross-sectional strength). Finally the thwarts or cross-section benches were fitted. All were fastened with nails or trenails (pegs of oak or tree nails that would swell and tighten when wet, sometimes with a small wedge driven down the grain to further expand and tighten).

Viking ship construction developed boats that were light, strong, but flexible so that they worked well with the stresses of the sea. They were also shallow draught, which meant that they could still move through shallower river and estuary waters. Climbing in and out was also easier, as speed and surprise were a feature of many Viking visits!

Detail of dragon's head

Pin with dragon’s head (detail), AD 950–1000. Hedeby, modern Germany. Copper alloy. Archäologisches Landesmuseum, Schloss Gottorf, Schleswig. © Wikinger Museum Haithabu

Dragons head prow, carved by artist Rob Johnsey, NMMC volunteer.

Dragons head prow, carved by artist Rob Johnsey, NMMC volunteer.

While all of this frantic construction was going on, our woodcarver Rob (a National Maritime Museum Cornwall volunteer) began to work on the stem head. His brief was to make something that would frighten the natives. With help from Patricia from the British Museum, he researched some designs, and decided to use a Viking pin that was being displayed in the exhibition as his inspiration. The head was to be detachable, following the Vikings practice – apparently the raiding boat would remove the stem head on return to its home port so as not to bring bad spirits back with them or scare those on dry land.

The project has enabled our team to get in a ‘Viking’ mind-set , as we will not only be building a replica of a 57-foot Roskilde boat, but likely some very Viking stage sets for the National Maritime Museum Cornwall Viking Voyagers exhibition, supported by the British Museum.


Vikings Live is at cinemas around the UK on 24 April.
Supported by BP

The BP exhibition Vikings: life and legend is at the British Museum until 22 June 2014.
Supported by BP
Organised by the British Museum, the National Museum of Denmark, and the Museum für Vor- und Frühgeschichte, Staatliche Museen zu Berlin

If you would like to leave a comment click on the title

Filed under: Vikings: life and legend, , , , ,

2 Responses - Comments are closed.

  1. beerviking says:

    Nice job Mike! Will you be using sawn or split planks for the full-size ship? (These ones look sawn, but I might be wrong…)

    Like

    • Mike Selwood says:

      could well go for cleaved boards from oak from our friends at Tregothnan, We hope the project will a collaboration with Roskilde..got to find the funding yet!

      Like

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 12,976 other followers

Categories

Follow @britishmuseum on Twitter

British Museum on Instagram

It’s World #PenguinDay! This handsome King Penguin on display in the Enlightenment Gallery is on loan from the @natural_history_museum
#penguin #museum #BritishMuseum Born #onthisday in 1599: Oliver Cromwell. Here’s a terracotta portrait bust from around 1759
#history #Cromwell #art #bust Greece lightning: this exquisite bronze depicts Zeus, chief of the Greek gods #FridayFigure

In ancient Greece, powerful, shape-shifting gods provided compelling subjects for artists. The famous sculptor Phidias created a gold and ivory statue of Zeus, ruler of the gods, that was over 13 metres high for his temple at Olympia. One of the Seven Wonders of the Ancient World, it symbolised the awesome presence of the god at his sanctuary site. There was also drama to be found in the gods’ ability to change their form as a means of disguise. Zeus, ruler of the Olympian gods, could take animal form – he seduced Leda as a swan, carried away Europa as a bull and Ganymede as an eagle.

This bronze statuette splendidly represents the majesty of Zeus, ruler of the gods on Mount Olympus and lord of the sky. Zeus holds a sceptre and a thunderbolt, showing his control over gods and mortals, and his destructive power. Although just over 20cm high, this exquisite work appears to be a copy of a much grander statue that does not survive.

You can see this figure in our exhibition #DefiningBeauty, until 5 July 2015.
Bronze statuette of Zeus. Roman period, 1st–2nd century AD, said to be from Hungary.
#art #museum #exhibition #ancientGreece #Zeus #gods This beautiful watercolour of Tintern Abbey is by J M W Turner, thought to have been born #onthisday in 1755.

Even before he had entered the Royal Academy schools at the age of 14, Turner had worked as an architectural draughtsman. This training is evident in his fascination with the details of the famous ruins of this twelfth-century Cistercian Abbey in Monmouthshire, which he visited in 1792, and again in 1793. Tourists of the time were as much impressed by the way that nature had reclaimed the monument as by the scale and grandeur of the buildings. Turner's blue-green washes over the abbey's far wall blend stone and leaf together, and on the near arch the spiralling creepers seem to make the wind and light tangible. 
#art #artist #Turner #history #watercolour ‪#IndigenousAustralia is now open. Discover a remarkable 60,000 years of continuous culture in our new special exhibition.
This show is the first major exhibition in the UK to present a history of Indigenous Australia through objects, celebrating the cultural strength and resilience of both Aboriginal peoples and Torres Strait Islanders. See spectacular objects like Torres Strait Islander masks alongside significant paintings.
Organised with the National Museum of Australia, ‪the exhibition also includes important international loans.
#history #Australia #museum #BritishMuseum Happy #StGeorgesDay! Here he is killing the dragon and rescuing Lady Una on a medieval pilgrim badge
#history #StGeorge #dragon
Follow

Get every new post delivered to your Inbox.

Join 12,976 other followers

%d bloggers like this: