British Museum blog

Piecing together the Chiseldon cauldrons puzzle

Alexandra Baldwin, British Museum

Alexandra Baldwin working on one of the Chiseldon cauldrons

As is often the case, the painstaking process of excavating the cauldron I’m working on has been more complex and time consuming than we initially thought.

The majority of the cauldron was lifted from its findspot in a block of soil supported by plaster bandages. Hundreds of smaller fragments were also removed from around the object during excavation. The fragmentary state of this cauldron is partially due to the fact that it was buried upside down, and over time the weight and the pressure of the overlying soil crushed and distorted it.

I began by carefully cutting away thin strips of plaster to reveal the top of the block and clear soil from the metal. With heavy clay soil, which is more solid than the objects, this has to be done with great care using scalpels and leaf trowels to remove soil dampened with water and alcohol.

One of the Chiseldon cauldrons before being unwrapped

Working down in layers, the sheet metal is uncovered, and the true condition of the object revealed. It is highly fragmentary and even undisturbed areas are in pieces.

Fragments loose in the soil have to be rejoined back onto larger sections immediately otherwise their location will be lost. This is done using thin tabs of nylon gossamer, a thin random weave of synthetic fibres, adhered over the join.

Removing the plaster support and soil from around the object makes it very unstable and because of this you are unable to see the entire object at once; the metal is so thin and fragile that it is unable to support its own weight.

I have now laid out the fragments from the excavation on a large table and have been looking for joins between them, and also between the fragments and metal contained in the soil block. Although I have found a number of joins there have been disappointingly few.

Fragments of one of the Chiseldon cauldrons

Very quickly it became apparent that there was something strange about this cauldron – there seemed to be too much copper alloy – several folded layers in the block as well as large sheet fragments.

From knowledge of other cauldrons we can tell that they are made in sections riveted together; the iron rim supporting the handles, then below this, two sections of copper alloy bowl. As I began to reveal more it appeared that there were two bases on top of each other – was this two cauldrons one inside another? Or were we looking at areas of a separate cauldron either displaced during burial or placed into the pit in fragments?

As each layer is revealed the position of the fragments is carefully recorded. Stephen Crummy, one of the Museum’s illustrators, has been using 3D laser scanning and photogrametery to map the block.

The next stage will be to try and decipher and interpret the remains. Then, after supporting and stabilising them, we will remove sections of the metal, effectively disassembling the object from around the soil.

The Chiseldon cauldrons research project is supported by the Leverhulme Trust

Find out more about this research project

If you would like to leave a comment click on the title

Filed under: Archaeology, Chiseldon cauldrons, Conservation, , , ,

2 Responses - Comments are closed.

  1. Ken Ormsby says:

    Saw the section on your work with the cauldrons on Digging for Britain. Fascinating, keep it up, can’t wait to see the final conclusions and reconstructions etc.

    Like

  2. Cassy Cutulle, UCL says:

    Very intriguing, can’t wait to see the publication! Thank you very much for the lecture and the tour of the labs today, Alexandra!

    Like

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 16,387 other followers

Categories

Follow @britishmuseum on Twitter

British Museum on Instagram

The grandeur of the Enlightenment Gallery is captured in this superb photo by @ykyoon5. This space was formerly known as the King’s Library, and was the first part of the ‘new’ 1823 Museum building to be completed. Careful restoration work began in the year 2000 to revive the room to its previous glory, and this is what visitors see today. The oak and mahogany floor and classical architectural features were cleaned and repaired after nearly 200 years of welcoming visitors. Hundreds of square metres of plaster were restored, along with the yellow and gold ornamentation on the ceiling. The balcony was also regilded and the whole room retains its Regency pomp.

#BritishMuseum #regram #Regency #interiors #restoration We’re sharing our favourite photos taken by visitors – use #myBritishMuseum if you’d like to feature! Here’s a brilliant shot by @j.ziolkowski that really captures the cool tones of the Great Court. We love the collision of lines in this photo – the hard edges of the original 1823 building set against the curvature of the later Reading Room and tessellation of the glass roof. 
Get snapping if you’d like to feature in our next #regram. 
#BritishMuseum #architecture #perspective #GreatCourt This Degas print is an example of the subject matter and technique the artist moved towards in the early 1890s. During this time, Degas produced sketchy prints showing female figures post-bathing. In this print we can see that the ink has been reworked during the printing process – the hair and shoulders show evidence of additional brushstrokes. The backgrounds of these works are much more sketchy and blurred than works he produced earlier in his career, perhaps showing his increased interest in figures.
#Degas #print #portrait The intense gaze of this young woman was originally intended to appear in the background of a horse racing scene by Degas, but the painting was never completed. This type of challenging composition is typical of the French artist’s work – he liked to crop the viewpoints of his paintings and sketches to create a different atmosphere. The coolly returned stare reverses the traditional relationship between viewer and subject, and emphasises Degas’ progressive approach to painting.
#Degas #painting #sketch #Paris French artist Edgar Degas died #onthisday in 1917. Today we’ll feature works that showcase his radical approach to framing subjects, and his subtle handling of form and tone. This vivid oil sketch from 1876–1877 depicts a repeated motif in Degas’ work – the Parisian ballet. He captured both performances and behind-the-scenes moments in his paintings and sketches, often using vantage points that give a fly-on-the-wall impression to his work. Degas worked rapidly but precisely – mirroring the movements of the dancers he portrayed – and this work is completed in thinned-down oil paint so that his quick brushstrokes could dry quickly.
#Degas #sketch #oilpainting #Paris #ballet Our #SunkenCities exhibition is the first at the British Museum on underwater archaeology. Over the last 20 years, world-renowned archaeologist Franck Goddio and his team have excavated spectacular underwater discoveries using the latest technologies. 
At the mouth of the Nile, the city of Thonis-Heracleion flourished as the main entry point into Egypt. Underwater excavations have found a large harbour, numerous ships and anchors, proving this was an international port. This magnificent monument was crucial to revealing that Thonis (in Egyptian) and Heracleion (in Greek) were in fact the same city. The decree was issued by the pharaoh Nectanebo I, regarding the taxation of goods passing through Thonis and Naukratis. A copy was found in the main Egyptian temple in each port. The inscription states that this slab stood at the mouth of the ‘Sea of the Greeks’ (the Mediterranean) in Thonis. 
Learn more about the connections between the ancient civilisations of Egypt and Greece in our #SunkenCities exhibition - until 30 November. Follow the link in our bio to find out more about it. 
Stela commissioned by Nectanebo I (r. 378–362 BC), Thonis-Heracleion, Egypt, 380 BC. On loan from National Museum, Alexandria. Photo: Christoph Gerigk. © Franck Goddio/Hilti Foundation.
%d bloggers like this: