British Museum blog

Piecing together the Chiseldon cauldrons puzzle

Alexandra Baldwin, British Museum

Alexandra Baldwin working on one of the Chiseldon cauldrons

As is often the case, the painstaking process of excavating the cauldron I’m working on has been more complex and time consuming than we initially thought.

The majority of the cauldron was lifted from its findspot in a block of soil supported by plaster bandages. Hundreds of smaller fragments were also removed from around the object during excavation. The fragmentary state of this cauldron is partially due to the fact that it was buried upside down, and over time the weight and the pressure of the overlying soil crushed and distorted it.

I began by carefully cutting away thin strips of plaster to reveal the top of the block and clear soil from the metal. With heavy clay soil, which is more solid than the objects, this has to be done with great care using scalpels and leaf trowels to remove soil dampened with water and alcohol.

One of the Chiseldon cauldrons before being unwrapped

Working down in layers, the sheet metal is uncovered, and the true condition of the object revealed. It is highly fragmentary and even undisturbed areas are in pieces.

Fragments loose in the soil have to be rejoined back onto larger sections immediately otherwise their location will be lost. This is done using thin tabs of nylon gossamer, a thin random weave of synthetic fibres, adhered over the join.

Removing the plaster support and soil from around the object makes it very unstable and because of this you are unable to see the entire object at once; the metal is so thin and fragile that it is unable to support its own weight.

I have now laid out the fragments from the excavation on a large table and have been looking for joins between them, and also between the fragments and metal contained in the soil block. Although I have found a number of joins there have been disappointingly few.

Fragments of one of the Chiseldon cauldrons

Very quickly it became apparent that there was something strange about this cauldron – there seemed to be too much copper alloy – several folded layers in the block as well as large sheet fragments.

From knowledge of other cauldrons we can tell that they are made in sections riveted together; the iron rim supporting the handles, then below this, two sections of copper alloy bowl. As I began to reveal more it appeared that there were two bases on top of each other – was this two cauldrons one inside another? Or were we looking at areas of a separate cauldron either displaced during burial or placed into the pit in fragments?

As each layer is revealed the position of the fragments is carefully recorded. Stephen Crummy, one of the Museum’s illustrators, has been using 3D laser scanning and photogrametery to map the block.

The next stage will be to try and decipher and interpret the remains. Then, after supporting and stabilising them, we will remove sections of the metal, effectively disassembling the object from around the soil.

The Chiseldon cauldrons research project is supported by the Leverhulme Trust

Find out more about this research project

If you would like to leave a comment click on the title

Filed under: Archaeology, Chiseldon cauldrons, Conservation, , , ,

2 Responses - Comments are closed.

  1. Ken Ormsby says:

    Saw the section on your work with the cauldrons on Digging for Britain. Fascinating, keep it up, can’t wait to see the final conclusions and reconstructions etc.

    Like

  2. Cassy Cutulle, UCL says:

    Very intriguing, can’t wait to see the publication! Thank you very much for the lecture and the tour of the labs today, Alexandra!

    Like

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 16,342 other followers

Categories

Follow @britishmuseum on Twitter

British Museum on Instagram

Our #AfricanRockArt project team is cataloguing and uploading around 25,000 digital images of rock art from throughout the continent. Working with digital photographs has allowed the Museum to use new technologies to study, preserve, and enhance the rock art, while leaving it in situ.

As part of the cataloguing process, the project team document each photograph, identifying what is depicted. Sometimes images are faded or unclear. Using photo manipulation software, images can be run through a process that enhances the pigments. By focusing on different sets of colours, we can now see the layers that were previously hidden to the naked eye.

This painted panel, from Kondoa District in #Tanzania, shows the white outline of an elephant’s head at the right, along with some figures in red that it is possible to highlight with digital enhancement.

Tanzania contains some of the densest concentrations of rock art in East Africa, mainly paintings found in the Kondoa area and adjoining Lake Eyasi basin. The oldest of these paintings are attributed to hunter-gatherers and may be 10,000 years old.

Follow the link in our bio to learn more about the project and see stunning #rockart from Africa. This week we’re highlighting the work of our #AfricanRockArt image project. The project team are now in the third year of cataloguing, and have uploaded around 19,000 digital photographs of rock art from all over #Africa to the Museum’s collection online database.

This photograph shows an engraving of a large, almost life-sized elephant, found on the Messak Plateau in #Libya. This region is home to tens of thousands of depictions, and is best known for larger-than-life-size engravings of animals such as elephants, rhino and a now extinct species of buffalo. This work of rock art most likely comes from the Early Hunter Period and could be up to 12,000 years old.

Follow the link in our bio and explore 30,000 years of stunning rock art from Africa. © TARA/David Coulson. Watch the incredible discovery of this colossal statue, submerged under the sea of thousands of years. This colossal 5.4-metre statue of Hapy was discovered underwater in what was the thriving and cosmopolitan seaport of Thonis-Heracleion. It once stood in front of a temple and would have been an impressive sight for traders and visitors arriving from the Mediterranean.

Come face to face with the ancient Egyptian god Hapy for yourself in our‪ #SunkenCities exhibition, until 27 November 2016.

Colossal statue of Hapy. Thonis-Heracleion, Egypt. About 380-250 BC. Maritime Museum, Alexandria. © Franck Goddio/Hilti Foundation. The discovery of this stela, which once stood at the entrance of the main entry port into ancient Egypt, was an extraordinary moment. Its inscription detailing taxes helped solve a 2,000-year-old mystery!

This magnificent monument was crucial to revealing that Thonis (in Egyptian) and Heracleion (in Greek) were in fact the same city. The decree was issued by the pharaoh Nectanebo I, regarding the taxation of goods passing through the cities of Thonis and Naukratis, and it originally stood in the Temple of Amun-Gereb. The inscription states that this slab stood at the mouth of the ‘Sea of the Greeks’ (the Mediterranean) in Thonis.

A bilingual decree found in 1881 refers in its Greek inscription to ‘the Temple of Heracleion’ and in hieroglyphs to ‘the Temple of Amun-Gereb’. Together these objects revealed that Thonis and Heracleion were the same place.

Learn more about the deep connections between the great ancient civilisations of Egypt and Greece in our #SunkenCities exhibition.
Stela commissioned by Nectanebo I (r. 380–362 BC), Thonis-Heracleion, Egypt, 380 BC. © Franck Goddio/Hilti Foundation. For centuries nobody suspected that the #SunkenCities of Thonis-Heracleion and Canopus lay beneath the sea. Recorded in ancient writings and Greek mythology, the ancient Egyptian cities were believed to be lost.

Over the last 20 years, world-renowned archaeologist Franck Goddio and his team have excavated spectacular underwater discoveries using the latest technologies. The amazing rediscovery of these lost cities is transforming our understanding of the deep connections between the great ancient civilisations of Egypt and Greece.

See more magical moments of discovery in our #SunkenCities exhibition, until 27 November 2016. © Franck Goddio/Hilti Foundation.

#archaeology #diving #ancientEgypt This week we’re highlighting some of the incredible clocks and watches on display in the Museum. Mechanical clocks first appeared in Europe at some time between 1200 and 1300. Their introduction coincided with a growing need to regulate the times of Christian prayer in the monasteries. Telling the time with a sundial was especially difficult in western Europe with its unreliable weather. From the end of the 13th century, clocks were being installed in cathedrals, abbeys and churches all around Europe.

The design of turret clocks (public clocks) changed little over the following three centuries and this particular example, made around 1600, has similar characteristics to clocks made for churches in the medieval period. The maker of this clock was Leonard Tenant, one of the most prolific makers of church clocks in the first half of the 17th century. The clock was installed in Cassiobury Park, a country house near Watford.

See this incredible clock in Rooms 38-39 
#clocks #watches #horology
Follow

Get every new post delivered to your Inbox.

Join 16,342 other followers

%d bloggers like this: