British Museum blog

Piecing together the Chiseldon cauldrons puzzle

Alexandra Baldwin, British Museum

Alexandra Baldwin working on one of the Chiseldon cauldrons

As is often the case, the painstaking process of excavating the cauldron I’m working on has been more complex and time consuming than we initially thought.

The majority of the cauldron was lifted from its findspot in a block of soil supported by plaster bandages. Hundreds of smaller fragments were also removed from around the object during excavation. The fragmentary state of this cauldron is partially due to the fact that it was buried upside down, and over time the weight and the pressure of the overlying soil crushed and distorted it.

I began by carefully cutting away thin strips of plaster to reveal the top of the block and clear soil from the metal. With heavy clay soil, which is more solid than the objects, this has to be done with great care using scalpels and leaf trowels to remove soil dampened with water and alcohol.

One of the Chiseldon cauldrons before being unwrapped

Working down in layers, the sheet metal is uncovered, and the true condition of the object revealed. It is highly fragmentary and even undisturbed areas are in pieces.

Fragments loose in the soil have to be rejoined back onto larger sections immediately otherwise their location will be lost. This is done using thin tabs of nylon gossamer, a thin random weave of synthetic fibres, adhered over the join.

Removing the plaster support and soil from around the object makes it very unstable and because of this you are unable to see the entire object at once; the metal is so thin and fragile that it is unable to support its own weight.

I have now laid out the fragments from the excavation on a large table and have been looking for joins between them, and also between the fragments and metal contained in the soil block. Although I have found a number of joins there have been disappointingly few.

Fragments of one of the Chiseldon cauldrons

Very quickly it became apparent that there was something strange about this cauldron – there seemed to be too much copper alloy – several folded layers in the block as well as large sheet fragments.

From knowledge of other cauldrons we can tell that they are made in sections riveted together; the iron rim supporting the handles, then below this, two sections of copper alloy bowl. As I began to reveal more it appeared that there were two bases on top of each other – was this two cauldrons one inside another? Or were we looking at areas of a separate cauldron either displaced during burial or placed into the pit in fragments?

As each layer is revealed the position of the fragments is carefully recorded. Stephen Crummy, one of the Museum’s illustrators, has been using 3D laser scanning and photogrametery to map the block.

The next stage will be to try and decipher and interpret the remains. Then, after supporting and stabilising them, we will remove sections of the metal, effectively disassembling the object from around the soil.

The Chiseldon cauldrons research project is supported by the Leverhulme Trust

Find out more about this research project

If you would like to leave a comment click on the title

Filed under: Archaeology, Chiseldon cauldrons, Conservation, , , ,

2 Responses - Comments are closed.

  1. Ken Ormsby says:

    Saw the section on your work with the cauldrons on Digging for Britain. Fascinating, keep it up, can’t wait to see the final conclusions and reconstructions etc.

    Like

  2. Cassy Cutulle, UCL says:

    Very intriguing, can’t wait to see the publication! Thank you very much for the lecture and the tour of the labs today, Alexandra!

    Like

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 16,381 other followers

Categories

Follow @britishmuseum on Twitter

British Museum on Instagram

Our #SunkenCities exhibition is the first at the British Museum on underwater archaeology. Over the last 20 years, world-renowned archaeologist Franck Goddio and his team have excavated spectacular underwater discoveries using the latest technologies. 
At the mouth of the Nile, the city of Thonis-Heracleion flourished as the main entry point into Egypt. Underwater excavations have found a large harbour, numerous ships and anchors, proving this was an international port. This magnificent monument was crucial to revealing that Thonis (in Egyptian) and Heracleion (in Greek) were in fact the same city. The decree was issued by the pharaoh Nectanebo I, regarding the taxation of goods passing through Thonis and Naukratis. A copy was found in the main Egyptian temple in each port. The inscription states that this slab stood at the mouth of the ‘Sea of the Greeks’ (the Mediterranean) in Thonis. 
Learn more about the connections between the ancient civilisations of Egypt and Greece in our #SunkenCities exhibition. Follow the link in our bio to find out more about it. 
Stela commissioned by Nectanebo I (r. 378–362 BC), Thonis-Heracleion, Egypt, 380 BC. Photo: Christoph Gerigk. © Franck Goddio/Hilti Foundation. For centuries nobody suspected that Thonis-Heracleion and Canopus lay beneath the sea. Recorded in ancient writings and Greek mythology, the cities were believed to be lost. After sightings from a plane, a diving survey was organised in 1933 to explore submerged ruins. But it was only from 1996, with the use of innovative techniques and a huge survey covering 42 square miles of the seabed, that underwater archaeologists rediscovered the lost cities. 
Thonis-Heracleion and Canopus were thriving cities long before the foundation of the great port of Alexandria in 331 BC. Finds suggest that they were still inhabited into the AD 700s. The cities’ disappearance was caused by gradual subsidence into the sea – much like Venice today – coupled with earthquakes and tidal waves. This triggered a phenomenon known as land ‘liquefaction’, when the ground turns into liquid. 
This reconstruction shows what the port of Thonis-Heracleion could have looked like, dominated by the Temple of Amun-Gereb. Follow the link in our bio to book your tickets to our #SunkenCities exhibition. © Yann Bernard. © Franck Goddio/Hilti Foundation. Recent underwater excavations at the mouth of the Nile in Abukir Bay, Egypt, have revealed two ancient cities, perfectly preserved beneath the sea. Our #SunkenCities exhibition tells of the extraordinary rediscovery of the international port Thonis-Heracleion, and the city of Canopus, famed for their temples which attracted religious devotees from Egypt and beyond. 
Since 1996, underwater investigation using state-of-the-art technology has uncovered spectacular objects, including colossal statues, religious offerings and ancient ships. The finds shed new light on the interaction between ancient Egypt and the Greek world at a crucial period in their history, from the arrival of Greeks in Egypt around 650 BC, to the reign of the Greco-Macedonian Cleopatra VII, the last pharaoh of Egypt (51–30 BC). With only a fraction of these sites explored so far, annual excavations are continuing to uncover the cities’ long-hidden secrets. 
This 2,000-year-old bust depicts Neilos, the Nile river god. Neilos appealed to Egyptians and Greeks alike – he was the Greek version of Hapy, the Egyptian personification of the annual Nile flood that brought prosperity and fertility to the land. This bust was once mounted into a large decorative shield and adorned a temple in the ancient Egyptian city of Canopus. It was discovered by underwater archaeologists at the base of the wall on which it once hung. 
Follow the link in our bio to find out more about our unmissable exhibition. 
Bust of Neilos. Canopus, AD 100–200. Maritime Museum, Alexandria. Photo: Christoph Gerigk. © Franck Goddio/Hilti Foundation. This astonishingly detailed miniature altarpiece has been photographed by @micahfoundaquarter. Made in 1511 in the Netherlands, it’s only 25cm tall but contains incredibly intricate carvings that show Christian religious scenes in triptych form (in three parts). Aside from the masterful craftsmanship, this object is notable for its use of both Gothic and Renaissance stylings. It offers an insight into the spread of ideas and styles into northern Europe from the birthplace of the Renaissance, Italy.
Share your photos with us using #myBritishMuseum
#carving #Gothic #Renaissance #Netherlands #detail This photo by @ozemile captures the pensive expression of Marsyas, a figure from Roman and Greek mythology. Marsyas was a satyr, male companions of the Greek god of wine, Dionysus (Roman: Bacchus). Among other things they were associated with playing the aulos, an ancient type of wind instrument. In this Roman statue, Marsyas is portrayed making the fateful decision to pick up the pipes that had been invented and discarded by the goddess Athena. Later, he accepted a musical challenge against Apollo’s lyre (a small harp-like instrument). Unfortunately for Marsyas, he lost, and suffered a grisly demise for daring to challenge a god!
Share your photos with us using #myBritishMuseum
#Roman #statue #Greek #sculpture #mythology We’re highlighting some of our favourite photos taken by visitors. Don’t forget to share your photos with us using #myBritishMuseum. Here’s a great shot of the Discobolus – that means ‘discus thrower’ – by @everyjoon. The photo captures the majestic scale of the athlete, and his dynamic pose. Sculpted during the 2nd century AD in Roman Italy, the statue is in fact a copy of a Greek bronze original, made around 700 years earlier. It was found in Hadrian’s villa at Tivoli, near Rome. Among other things, it is famous for having a head that doesn’t belong to the original body. The head is very close in age and style, and uses marble that is exceptionally well-matched to the torso, but it has been attached at the wrong angle! Complete statues from the time reveal the head to be turned to look towards the discus, rather than the floor.
#Discobolus #sculpture #Roman #Greek #statue #discus
%d bloggers like this: