British Museum blog

Piecing together the Chiseldon cauldrons puzzle

Alexandra Baldwin, British Museum

Alexandra Baldwin working on one of the Chiseldon cauldrons

As is often the case, the painstaking process of excavating the cauldron I’m working on has been more complex and time consuming than we initially thought.

The majority of the cauldron was lifted from its findspot in a block of soil supported by plaster bandages. Hundreds of smaller fragments were also removed from around the object during excavation. The fragmentary state of this cauldron is partially due to the fact that it was buried upside down, and over time the weight and the pressure of the overlying soil crushed and distorted it.

I began by carefully cutting away thin strips of plaster to reveal the top of the block and clear soil from the metal. With heavy clay soil, which is more solid than the objects, this has to be done with great care using scalpels and leaf trowels to remove soil dampened with water and alcohol.

One of the Chiseldon cauldrons before being unwrapped

Working down in layers, the sheet metal is uncovered, and the true condition of the object revealed. It is highly fragmentary and even undisturbed areas are in pieces.

Fragments loose in the soil have to be rejoined back onto larger sections immediately otherwise their location will be lost. This is done using thin tabs of nylon gossamer, a thin random weave of synthetic fibres, adhered over the join.

Removing the plaster support and soil from around the object makes it very unstable and because of this you are unable to see the entire object at once; the metal is so thin and fragile that it is unable to support its own weight.

I have now laid out the fragments from the excavation on a large table and have been looking for joins between them, and also between the fragments and metal contained in the soil block. Although I have found a number of joins there have been disappointingly few.

Fragments of one of the Chiseldon cauldrons

Very quickly it became apparent that there was something strange about this cauldron – there seemed to be too much copper alloy – several folded layers in the block as well as large sheet fragments.

From knowledge of other cauldrons we can tell that they are made in sections riveted together; the iron rim supporting the handles, then below this, two sections of copper alloy bowl. As I began to reveal more it appeared that there were two bases on top of each other – was this two cauldrons one inside another? Or were we looking at areas of a separate cauldron either displaced during burial or placed into the pit in fragments?

As each layer is revealed the position of the fragments is carefully recorded. Stephen Crummy, one of the Museum’s illustrators, has been using 3D laser scanning and photogrametery to map the block.

The next stage will be to try and decipher and interpret the remains. Then, after supporting and stabilising them, we will remove sections of the metal, effectively disassembling the object from around the soil.

The Chiseldon cauldrons research project is supported by the Leverhulme Trust

Find out more about this research project

If you would like to leave a comment click on the title

Filed under: Archaeology, Chiseldon cauldrons, Conservation, , , ,

Receive notifications of new posts by email.

Join 16,402 other followers


Follow @britishmuseum on Twitter

British Museum on Instagram

Here @edoardofanfani captures the youthful look and friendly expression of this statue of Amenhotep III. The colossal limestone statue originally stood with hundreds of others in the temple of Amenhotep III, which was on the west bank of the River Nile near the ancient city of Thebes. 
Statues depicting the pharaoh often show him with his eyes appearing to look down on the viewer, and a slight smile emerging from his lips. He is wearing heavy makeup, with sweeping eyeliner that nearly touches the temples, and stylised eyebrows. Share your photos with us using #myBritishMuseum 
#AncientEgypt #Sculpture #Statue #Pharaoh #Egypt #eyebrowsonfleek This great photo by @comertcomi shows one of ancient Egypt’s most highly respected animals. Cats were associated with the goddess Bastet and she is often represented as a domestic cat. This statue is a particularly fine example, with gold rings and silver decoration. The collar also contains a silver wedjat-eye and sun-disk which are protective symbols. It also has a scarab on its head – scarabs were associated with rebirth in ancient Egypt. The eyes were perhaps originally inlaid with glass or stones. 
Share your photos with us using #myBritishMuseum
#AncientEgypt #Sculpture #Statue #Cat #Egypt #🐱 #catsofinstagram #regram #repost This week we’re focusing on Egyptian statues and sculpture at the Museum. This great shot by @sisterofpopculture shows the majestic statue of Ramesses II. Made of pink and grey granite, the sculptor has skilfully used the natural colours in the stone to suggest the difference between the face and body. 
This colossal statue was originally part of a pair that stood outside the Ramesseum (the pharaoh’s huge memorial temple). He is also known as ‘Ramesses the Great’ – he ruled for 66 years and his influence reached to the furthest corners of the realm. 
Share your photos with us using #myBritishMuseum
#AncientEgypt #Sculpture #Statue #Pharaoh #Egypt #regram Opening in March 2017, our #AmericanDream exhibition presents the Museum’s outstanding collection of modern and contemporary American prints for the first time. These will be shown with important works from museums and private collections around the world.

From Andy Warhol, Jasper Johns and Robert Rauschenberg to Ed Ruscha, Kara Walker and Julie Mehretu – all boldly experimented with printmaking.  With over 200 works by almost 70 artists, trace the creative momentum of a superpower across six decades. Click the link in our bio to book your tickets now! 
Edward Ruscha (b. 1937), Made in California. Colour lithograph, 1971. © Ed Ruscha. Reproduced by permission of the artist.
#print #printmaking #art #🇺🇸 Taking inspiration from the world around them – billboard advertising, politics, Hollywood, and household objects – American artists created highly original prints to rival their paintings and sculptures. #Printmaking brought their work to a much wider and more diverse audience.

Many of these works also address the deep divisions in society that continue to resonate with us today. This screenprint by Andy Warhol was commissioned by the Democratic Party for the 1972 presidential campaign. Instead of portraying the Democratic candidate McGovern, Warhol chose to represent his opponent Richard Nixon. He appropriated the image from the cover of Newsweek magazine, using the colours from Nixon's wife's outfit for his face, creating a demonic look.

See this new acquisition by the Museum, and many other extraordinary works in our #AmericanDream exhibition, opening March 2017. Click the link in our bio for more info.

Andy Warhol (1928-1987), Vote McGovern. Screenprint, 1972. © 2016 The Andy Warhol Foundation for the Visual Arts, Inc. / Artists Rights Society (ARS), New York and DACS, London.
#art #Warhol #AndyWarhol #🇺🇸 #print #Democrats #politics America. Land of the free. Home of the brave...
We are delighted to announce our #AmericanDream exhibition – opening in March 2017!

The past six decades have been among the most dynamic and turbulent in US history, from JFK’s assassination, Apollo 11 and Vietnam to the AIDS crisis, racism and gender politics. Responding to the changing times, American artists produced prints unprecedented in their scale and ambition. 
Experience this extraordinary history in ‘The American Dream: pop to the present’. This major new exhibition is sponsored by Morgan Stanley and supported by the Terra Foundation for American art. Click the link in our bio to book your tickets now.

Jasper Johns (b. 1930), Flags I. Screenprint, 1973. Collection of Johanna and Leslie Garfield. © Jasper Johns/VAGA, New York/DACS, London 2016. © Tom Powel Imaging.
#🇺🇸 #art #JasperJohns #printmaking
%d bloggers like this: